RGB – Multicolor printing is an offset printing technique developed by Agpograf, which uses RGB to RGB instead of the conventional CMYK. The prints are made using 7 colours, and with the result of brighter, sharper, deeper, more accurate prints with higher contrasts, thanks to a huge increase in the range of colour that can be reproduced.

Whenever you want high quality, incredibly accurate colour prints, from a colour range that CMYK cannot match, including oranges, reds, greens, purples and blues (see the colour chart in the catalogue for the full range), or when you want to produce COLOUR CHARTS AND PRODUCT SAMPLES.

Not at all. Our only recommendation is that you provide us with images that are as high quality as possible, and make sure the images you want to print in Multicolor are in the Adobe RGB1998 colour profile.

Save the images in the Adobe RGB 1998 colour profile, and save as PDF-X4 instead of the traditional PDF-X1.

Open Photoshop, and with the Adobe RGB 1998 colour profile applied, go to VIEW-INFO PALETTE. You will then be able to see the colours that cannot be reproduced using CMYK, but which can be reproduced using Multicolor, as they will appear in grey.

The colour proofs in CMYK ISO 12647/7 are a good base to see the final result you will get in print form. Colour proofs for Multicolor produced by Agpograf are also a good base to see the final result of Multicolor when printed.

Unfortunately there is no colour palette available that includes the entire colour spectrum for PANTONE, but Multiccolor has a very wide colour range, and we can confirm that the vast majority of PANTONE colours can be reproduced by Multicolor, except for certain small differences in Delta AE (CIEDE 2000), which are indistinguishable to the human eye.

How do you convert images between PANTONE and Multicolor?

We have incorporated all the PANTONE colour libraries, and when making a colour conversion the system searches for the PANTONE colour specified in Multicolor based on information for the colour spectrum and minimising the visual differences when the image is printed.
In addition to completing the process, a report is created detailing any differences in colours once the image has been printed, and it is possible to see if the result will be what you want before printing.

There are colours that will not work with Multicolor, such as metallic colours (silver, gold, etc.).

It will work with any formats, as the system developed by Agpograf is very versatile in terms of direct colour conversion. It can import colour tables in different formats, such as: ACO, CXF, CCF, ICC and TXT. This allows each customer to read the colour range directly, or through a spectrophotometer.

One of the most important aspects is that you can see any colour deviations before printing.

There are two types of paper that work well with RGB – Multicolor printing: coated paper (whether glossy, matte or semi-matte), and offset paper (the higher quality the better). The first example gives a much “lighter” finish to the printed product, with higher definition. The second format also gives a “light” finish, which is especially important because, as you know, offset paper absorbs ink and thus the “light” when printed, which corrects this common problem with offset paper.

The system allows you to create customised profiles for different types of paper and according to specific requirements. To do this, you must first make carry out a series of tests to create a new colour palette, and to check it works properly.

The system Agpograf has developed is very versatile, and analyses the colours according to the colour mode (RGB, CMYK, Grayscale or Lab). According to the colour mode chosen, you can choose what you would like to do, for example: convert everything in RGB to Multicolor, while leaving everything in CMYK as it is, or change it in accordance with ISO 12647/2. The same goes for grayscale or Lab, so we covert the colour according to the specific colour mode.

It improves the sharpness of the image without a doubt, because it eliminates the blotchy effect that occurs when using conventional AM.
It also avoids the Moiré effect that occurs when using AM with 7 colours. You can see the differences in the image below:

One of the reasons the images are so sharp is due to the use of the stochastic screen, but another very important reason is the autofocus system used when converting RGB images to Multicolor.

As Multicolor works with a very broad range of colours, you may need to make certain readjustments to ensure there is no loss of focus during the conversion.
The autofocus system analyses each image by adjusting the focus of the same according to different criteria, such as size, resolution, and so on.
This combination is what creates such a sharp printed result, with perfect focus.

Any client who needs or requires extremely high quality in their products, to give some examples: art, jewellery, optics, fashion, painting, photography, ceramics, cosmetics, furniture, colour charts, sample books, etc.